Material guide

What Is Quartz Glass?

Composition, structure, properties, and how it differs from fused quartz, fused silica, and ordinary glass.

Quick Answer: Quartz glass is an amorphous, high-purity silicon dioxide (SiO₂) glass made by melting natural quartz crystal or synthetic silica without soda, lime, or boron fluxes. The disordered Si–O network gives it high-temperature stability, very low thermal expansion, broad UV-to-infrared transmission, and chemical inertness. It is specified for semiconductor processware, optical windows, furnace tubes, and laboratory apparatus.

  • Single-oxide glass. Nearly pure SiO₂ — typically ≥ 99.99% for industrial grades.
  • Amorphous, not crystalline. Same chemistry as quartz mineral; different structure and behavior.
  • Properties depend on grade. Purity, OH content, and fusion method change optical and thermal limits.
  • Used where ordinary glass fails. High heat, UV, thermal shock, or metallic contamination control.

Written by the FGQuartz Engineering Team · Updated November 2026

On this page: Quartz vs quartz glass · What it is made of · Amorphous structure · Properties · How it is made · Types · Fused quartz vs fused silica · Vs ordinary glass · Applications · Advantages and limits · How to choose · FAQ

Quartz glass is not the same thing as quartz

In geology, quartz is a crystalline mineral: silicon dioxide arranged in a repeating hexagonal lattice. It is birefringent, has a density around 2.65 g/cm³, and undergoes an α–β phase change near 573 °C. That crystal is a feedstock. It is not the material used for furnace tubes, wafer boats, or UV windows.

Quartz glass is the glassy (amorphous) form of SiO₂ produced by melting that feedstock — or a synthetic silica precursor — and cooling it before crystals can grow. Density drops to about 2.20 g/cm³. Optical behavior becomes isotropic. Thermal expansion collapses. The working temperature rises far above soda-lime or borosilicate glass because no fluxing oxides were added to lower the melt.

This distinction matters in purchasing. A drawing that says “quartz” may mean crystalline quartz, fused quartz, or synthetic fused silica. If the part must transmit 193 nm, survive 1100 °C cycling, or stay free of alkali metals, the structure and the fusion route both have to be named — not just the word “quartz.”

What is quartz glass made of?

Quartz glass is made of silicon dioxide. Industrial and semiconductor grades are typically specified at SiO₂ ≥ 99.99% (4N). Optical synthetic fused silica can reach 5N–6N. The remaining budget is trace metals (Al, Fe, Na, K, Li, Ti, Cu) plus hydroxyl (OH) groups, which are specified separately because they affect viscosity, IR absorption, and high-temperature use.

Unlike soda-lime or borosilicate glass, quartz glass contains no intentional soda, lime, lead, or boron oxide. Those fluxes make ordinary glass melt and form at convenient temperatures. They also raise thermal expansion, cut UV transmission, and introduce ions that semiconductor and analytical processes cannot tolerate.

Two feedstocks, one chemistry

Feedstock Typical product name What it implies
Natural quartz crystal or high-purity quartz sand Fused quartz / natural quartz glass Purity limited by the mineral. Residual Al and alkali at ppm level. Cost-effective for processware.
Synthetic precursors (commonly SiCl₄) Synthetic fused silica Higher chemical purity and optical homogeneity. Preferred for deep-UV optics and demanding semiconductor optics.

FGQuartz’s standard process materials are specified at SiO₂ ≥ 99.99% with total metallic impurities typically held below 20 ppm. Hydroxyl is specified by grade: electrically fused process material is often low-OH, while UV synthetic grades may carry 1000–2000 ppm OH by design. Full tables live on the technical specifications page.

Hydroxyl (OH) is a specification, not automatically a defect

Water is incorporated as Si–OH. High OH lowers viscosity and the practical service temperature, and it creates absorption bands around 2.7 µm (and weaker bands in the near-IR). That is why IR-grade material is dried to very low OH. UV-grade synthetic fused silica, by contrast, is often high-OH because the flame-hydrolysis route that produces the best deep-UV transmission also introduces hydroxyl. Specify OH against the wavelength and the temperature, not against a single “purer is drier” rule.

Why the amorphous structure matters

Crystalline quartz is anisotropic: refractive index and expansion differ by crystal axis. Fused quartz and fused silica are isotropic glasses. There is no preferred direction, which is why they can be used as optical windows, furnace tubes, and precision-ground rods without birefringence from the lattice itself (stress birefringence is a separate, process-controlled issue).

The Si–O–Si network is strongly bonded and highly connected. That is the origin of the high softening range, chemical durability, and electrical resistivity. It is also why quartz glass is difficult to melt and form: there is no flux to open the network, so fusion takes place well above 1700 °C, and fabrication is done with diamond tooling or oxy-hydrogen flame rather than conventional glass-shop methods.

Properties of quartz glass

Published numbers are typical values for a given fusion route and hydroxyl level. They are not universal constants. Where FGQuartz quotes a single figure on product pages, it describes our standard electrically fused, high-purity process material — not every optical or synthetic grade.

Thermal properties

The coefficient of thermal expansion of FGQuartz fused silica is 5.5 × 10⁻⁷ /°C between 20 °C and 300 °C. That is about six times below borosilicate and far below soda-lime glass. Combined with modest thermal conductivity (~1.4 W/(m·K) at 20 °C), it is why a properly designed red-hot tube can take a thermal quench that would shatter ordinary glass.

Softening, annealing, and strain points move with hydroxyl and impurity content. Electrically fused natural quartz typically softens near 1680 °C; flame-fused material is somewhat lower; high-OH synthetic fused silica is lower still (around 1600 °C). Continuous service is not the softening point. In practice:

  • FGQuartz fused silica supports continuous service to 1200 °C (2192 °F) and short-term exposure to 1300 °C (2372 °F), with a softening point of approximately 1680 °C.
  • High-OH synthetic grades are usually derated. Long holds above ~1000–1100 °C accelerate devitrification if surfaces are contaminated.
  • Surface alkali, fingerprints, and furnace dust act as nucleation sites. Cleanliness often limits life more than the datasheet temperature, so clean parts before high-temperature use.

Confirm grade before using these figures for optical synthetic material.

Optical properties and UV transmission

Clear quartz glass transmits from the deep ultraviolet into the near infrared. The cutoff is grade-dependent:

Grade family Typical window Notes
Synthetic UV (JGS1 / Type III) ≈ 185–2500 nm Best deep-UV; high OH; absorption near 2.7 µm.
Natural optical (JGS2) ≈ 220–2500 nm General UV–Vis work; more economical.
Low-OH IR (JGS3 / dried synthetic) ≈ 260–3500 nm Removes the water band; weaker deep-UV.
Process-grade clear fused quartz UV–Vis, not a guaranteed optical spec Bubbles, striae, and OH vary. State an optical grade for 185 nm performance.

Refractive index of high-purity fused silica is about 1.4585 at 589 nm, 20 °C. Transmission percentages must always be quoted with thickness, surface finish, and wavelength. A 10 mm JGS1 window at 254 nm is a different statement from an as-drawn process tube. Optical grade selection is covered on the optical quartz glass page.

Chemical resistance

Quartz glass is inert to water, most mineral acids, and organic solvents at ordinary process temperatures. It is attacked by hydrofluoric acid and by hot concentrated phosphoric acid, which dissolve the silica network. Hot strong alkalis (NaOH, KOH) also etch it. This is a material limit, not a quality defect: any high-purity SiO₂ glass behaves this way.

Electrical insulation

Fused silica is an excellent electrical insulator, with resistivity above 10¹⁸ Ω·cm at 20 °C and a dielectric constant of 3.75 (1 MHz, 20 °C). That combination — insulator plus thermal stability plus chemical purity — is why it is used for furnace liners, lamp envelopes, and high-temperature standoffs.

Mechanical behavior

Mohs hardness is typically 5.5–6.5. Compressive strength is high (1100 MPa); tensile strength is lower (48 MPa) and design values are derated for surface flaws. Quartz glass is hard and does not yield. Edge chips from diamond cutting become crack starters under thermal cycling, which is why fire polishing or controlled chamfers are part of serious fabrication, not cosmetics.

Mechanical, thermal, optical, and purity tables for FGQuartz material are collected on the specifications page rather than duplicated here.

Need numbers, not a definition

Open the technical specifications

Purity, OH, expansion, transmission, and mechanical data for FGQuartz fused silica — tabulated for engineers writing a drawing note.

View specifications

How quartz glass is made

All commercial quartz glass is fused SiO₂ that was cooled as a glass. The fusion route determines hydroxyl, residual metals, bubbles, and optical homogeneity. Industry practice (often following the Heraeus type classification) groups the routes as follows.

Electric fusion of natural quartz (Type I)

High-purity quartz crystal is melted in vacuum or a dry atmosphere with electric heating. Hydroxyl is typically low (below 1–30 ppm). This is the workhorse route for semiconductor process tubes, boats, and much industrial clear fused quartz. Metallic impurities track the mineral source.

Flame fusion of natural quartz (Type II)

Powdered quartz is fused in an oxy-hydrogen flame. Hydroxyl is higher, typically around 150–200 ppm, because the flame is a hydrogen-rich environment. Optical quality can be good; IR transmission is limited by the water band.

Synthetic fused silica (Type III and Type IV)

Silicon tetrachloride or a similar precursor is oxidized or hydrolyzed and deposited as silica, then vitrified. Flame hydrolysis (Type III) produces high-OH, high-UV material. Plasma or chemically dried routes (Type IV and related IR grades) produce low-OH synthetic silica. These are the materials behind deep-UV lithography optics, excimer laser windows, and the highest-homogeneity blanks.

From boule or tube stock to a finished part

Melting makes the material. Most industrial value is added afterward. Stock is drawn as tubes or rods, or sawn into plates, then:

  • Cold processed — diamond cutting, CNC milling, drilling, grinding, lapping, and polishing.
  • Thermally processed — oxy-hydrogen bending, blowing, welding, sealing, and fire polishing.
  • Annealed to relieve forming and machining stress.
  • Cleaned and inspected for cracks, inclusions, and dimensional tolerance.

That second half of the process is where a quartz glass manufacturer is actually judged: whether a diffusion tube concentricity, a boat slot pitch, or a viewport polish can be held in production, not only whether the SiO₂ is 4N. FGQuartz does both cold and thermal processing in one plant; see custom quartz glass fabrication.

Types of quartz glass

Buyers usually classify quartz glass four ways at once: feedstock, optical grade, appearance, and product form. Mixing those axes is how specifications become ambiguous.

By appearance

  • Clear fused quartz / fused silica — transparent. Used for process tubes, windows, labware, and most semiconductor quartzware.
  • Opaque or translucent fused quartz — dense microbubbles scatter light, producing a white body. Used where radiation shielding, IR heating, or thermal insulation matters more than see-through access. Do not specify “opaque quartz” when you need an optical window.

By optical grade

In Chinese and much of the Asian supply chain, optical fused silica is purchased as JGS1 (deep UV, synthetic), JGS2 (UV–visible, natural), or JGS3 (IR, low OH). Western catalogues use names such as Suprasil, Spectrosil, Homosil, Infrasil, or Corning 7980. The names are not one-to-one interchangeable; they are analogues. Use the optical quartz glass page when the drawing calls a transmission band rather than a brand.

By product form

The material becomes useful as a component. Common industrial forms include quartz glass tubes, rods, plates and windows, wafer boats, crucibles, process tanks, inline heaters, and fully custom fabrications to drawing.

Quartz glass vs fused quartz vs fused silica

These three names are not three different oxides. They are overlapping commercial names for amorphous SiO₂. Treating them as identical without context causes the wrong grade to be quoted; treating them as unrelated materials is equally wrong.

Term Strict technical use How it is used in industry
Quartz glass Umbrella term for vitreous (amorphous) SiO₂. Dominant in Asian B2B and many RFQs. Often includes both fused quartz and fused silica.
Fused quartz Glass melted from natural quartz crystal or sand. Process tubes, boats, crucibles, lamps. Purity typically ~4N. Cost baseline.
Fused silica Often reserved for synthetic material from chemical precursors. Sometimes used for all vitreous silica. In semiconductor and optics RFQs, “fused silica” frequently means the higher-purity or optical grade. In general industrial English it is used interchangeably with fused quartz.
Synthetic fused silica SiCl₄ (or equivalent) route; 5N–6N class purity. Deep-UV optics, photomasks, fiber preforms, high-homogeneity windows.
Natural quartz Crystalline mineral feedstock — not a glass. Should not appear on a finished-part drawing unless a crystal is required.

A practical rule for RFQs: if the part is a furnace tube, boat, tank, or crucible, fused quartz / process-grade quartz glass is usually sufficient. If the part is a 193 nm or 248 nm optic, or a homogeneity-specified window, write synthetic fused silica and the optical grade. If the drawing just says “quartz,” ask which of the five rows above was intended before pricing.

Quartz glass vs ordinary glass

Ordinary commercial glasses are mixed-oxide systems designed to melt and form cheaply. Quartz glass is almost pure silica, so it occupies a different performance envelope.

Property Quartz glass (fused silica) Borosilicate Soda-lime
SiO₂ content ≥ 99.99% typical ~70–81% plus B₂O₃, Na₂O, Al₂O₃ ~70% plus Na₂O, CaO
Continuous use 1200 °C (FGQuartz fused silica) ~450–500 °C ~120–150 °C in service
CTE 5.5 × 10⁻⁷ /°C ~3.3 × 10⁻⁶ /°C ~9 × 10⁻⁶ /°C
UV at 254 nm High (optical grades) Poor; cuts off ~300 nm Opaque in UV-C
Metallic ion risk Very low if specified Alkali present Alkali and alkaline earth present

Quartz glass is a higher-temperature, lower-expansion, higher-purity glass; design it to carry loads in compression with protected edges. For a dedicated comparison with laboratory borosilicate, see quartz glass vs borosilicate glass.

Applications of quartz glass

Quartz glass is specified when at least one of four constraints is binding: temperature above the borosilicate range, UV or IR optical access, metallic contamination control, or thermal-shock cycling. Those constraints concentrate in a handful of industries.

  • Semiconductor. Diffusion, oxidation, LPCVD, and anneal use process tubes, liners, injectors, wafer boats, and wet-bench tanks. The material has to stay dimensionally stable through 1000 °C+ cycles without doping the wafer with alkali metals.
  • Solar photovoltaic. CZ and DS crucibles, diffusion tubes, and carriers for PERC, TOPCon, and related lines. Volume and cost matter more than optical homogeneity; process-grade fused quartz is the usual choice.
  • Optics and UV. Windows, viewports, cuvettes, and laser optics in JGS grades. Deep-UV work is synthetic fused silica; general UV–Vis can be JGS2.
  • Fiber optics. High-purity tubes and starting rods for MCVD / OVD / VAD preform environments, where both OH and metallic purity affect attenuation.
  • Laboratory. Crucibles, combustion tubes, flasks, and apparatus that see 1000 °C or reagents that would leach alkali from borosilicate.
  • High-temperature industrial. Furnace tubes, sight glasses, and structural parts where thermal shock, not optical figure, is the design driver.

From material to a part

Explore quartz glass products

Tubes, rods, plates, boats, crucibles, tanks, and custom fused silica fabrication — the forms this material actually ships in.

Browse products

Advantages — and the limits that actually matter

What it does uniquely well

  • High continuous temperature among commercial glasses (1200 °C for FGQuartz fused silica), with very low expansion.
  • UV transmission that borosilicate and soda-lime cannot provide.
  • Chemical purity compatible with semiconductor and analytical blanks.
  • Flame-weldable and CNC-machinable, so complex assemblies are practical.
  • Electrical insulation at elevated temperature.

Limits to design around

  • Devitrification. Prolonged time at high temperature, especially with surface alkali or dust, nucleates cristobalite. The part turns cloudy, weakens, and can spall. Service life is a cleanliness and thermal-history problem as much as a peak-temperature problem.
  • HF and hot alkali. Do not specify quartz glass for hydrofluoric acid service. Hot KOH/NaOH will etch it.
  • Brittleness. High compressive strength does not mean impact tolerance. Handling, packing, and edge condition dominate field failures.
  • Grade matching. Match the grade to the job: process-grade tubes and boats for furnace duty, JGS optical grades for windows and laser optics.

How to choose the right quartz glass

A usable specification answers six questions. If any are blank, the quote will assume process-grade fused quartz and standard commercial tolerances — which may be correct, or may not.

  1. 1. Temperature and time. Continuous temperature, peak, and cycle count. This sets fusion type and OH, not just wall thickness.
  2. 2. Wavelength, if any. No optic needed → process grade. 254 nm or deeper → JGS1 / synthetic. IR past the water band → low-OH / JGS3.
  3. 3. Chemistry. HF is a stop. Hot alkali needs extra wall or a different material. Ultra-pure wet chemistry needs low metallic impurities, not just “quartz.”
  4. 4. Geometry. Tube, rod, plate, boat, crucible, tank, or a welded/CNC hybrid. Send DXF, STEP, IGES, or PDF.
  5. 5. Tolerance and surface. As-drawn, ground, fire-polished, or optical polish. Slot pitch, concentricity, and flatness belong on the drawing, not in an email after the PO.
  6. 6. Quantity and documentation. Prototype versus blanket order, and whether a composition certificate or optical scan is required.

FGQuartz reviews drawings for manufacturability — cold machining, flame work, or both — and typically returns a route and a price within 24 business hours. There is no minimum order quantity.

Application is defined

Request a custom quartz glass quote

Send dimensions, grade, quantity, and CAD. The reply is a fabrication route — thermal, CNC, or both — not a generic catalogue price.

Request a quote

Frequently asked questions about quartz glass

Short answers written to stand alone.

What is quartz glass?

Quartz glass is amorphous silicon dioxide (SiO₂) produced by melting natural quartz or synthetic silica without fluxing oxides. It is a glass, not crystalline quartz, and is used where high temperature, UV transmission, or chemical purity exceeds the range of ordinary glass.

Is quartz glass the same as fused silica?

In many catalogues, yes — both names describe vitreous SiO₂. In stricter usage, fused silica means synthetic material from chemical precursors, while fused quartz means material melted from natural crystal. Quartz glass is the umbrella term. Always confirm feedstock if UV cutoff or 6N purity is in the specification.

What is quartz glass made of?

It is made of SiO₂. Industrial grades are typically ≥ 99.99% silica, with trace metals in the ppm range. Hydroxyl (OH) is specified separately and can range from under 1 ppm in electrically fused or dried IR grades to ~1000–2000 ppm in UV synthetic grades.

Is quartz glass stronger than ordinary glass?

It is much more resistant to heat and thermal shock, harder than soda-lime glass (Mohs 5.5–6.5), and strong in compression (1100 MPa). Like all glass it is brittle, so parts are designed with supported, protected edges. “More thermally and chemically durable” describes it accurately.

Can quartz glass withstand high temperatures?

Yes. FGQuartz fused silica supports continuous service to 1200 °C (2192 °F) and short-term peaks to 1300 °C (2372 °F), with a softening point near 1680 °C. Continuous service is limited by sag, contamination, and devitrification, not by the softening point.

Does quartz glass transmit UV light?

Optical grades do. Synthetic UV fused silica (JGS1 class) typically transmits from about 185 nm. Natural optical fused quartz (JGS2) is closer to 220 nm. Process-grade tubing is not an optical specification — state a grade and a thickness for deep-UV performance.

What is quartz glass used for?

Semiconductor process tubes and wafer boats, solar CZ crucibles, UV and IR windows, fiber-optic preform hardware, laboratory high-temperature ware, and industrial furnace components. The common thread is heat, purity, or optical access.

What is the difference between quartz glass and borosilicate glass?

Borosilicate is a mixed-oxide glass (~80% SiO₂ plus boron and alkali) used to about 500 °C. Quartz glass is nearly pure SiO₂, with much lower expansion, UV transmission, and a service range to 1200 °C. Quartz is specified when a process needs more temperature, UV, or purity.

How is quartz glass manufactured?

Natural quartz is electrically or flame fused, or silica is synthesized from SiCl₄ and vitrified. Stock is then drawn or cut, and finished by diamond CNC and/or oxy-hydrogen flame work, followed by anneal and inspection. The fusion step sets purity and OH; the fabrication step sets geometry.

How do I choose quartz glass for my application?

Write down continuous temperature, wavelength (if any), chemistry, geometry, and tolerance. Those five items select fused quartz vs synthetic fused silica, JGS grade, and product form (tube, plate, boat, custom). If HF is in the process, choose a different material.

Is fused quartz the same as fused silica?

They share the same amorphous SiO₂ chemistry. Fused quartz is melted from natural crystal; fused silica often denotes the synthetic route. Thermal and chemical behavior are close. Optical UV cutoff, homogeneity, and metallic purity are not. Specify the route when those matter.

Why is quartz glass specified instead of regular glass?

SiO₂ without fluxes gives temperature capability and purity that regular glass cannot: FGQuartz fused silica runs to 1200 °C continuous, has near-zero thermal expansion, transmits UV in optical grades, and keeps total metal impurities below 20 ppm. Diamond machining and oxy-hydrogen welding turn it into tubes, boats, crucibles, and custom parts built to your drawing.

Specify the material, then the part

Quartz glass is amorphous, high-purity SiO₂. Fused quartz and fused silica are members of that family, distinguished by feedstock and process, not by a different oxide. Ordinary glass is a different family altogether. Once that is clear, the useful work is matching grade and geometry to temperature, wavelength, chemistry, and tolerance.

If you already have a drawing, send it. If you are still naming the material, start with temperature and wavelength — those two constraints eliminate most of the wrong grades before a quote is written.

Related pages

Keep reading

Technical specifications

Thermal, mechanical, optical, and chemical tables for fused silica.

Quartz glass vs borosilicate glass

Temperature, expansion, UV transmission, and purity compared.

Quartz glass tubes

Custom fused silica tubes, OD 5–1000 mm, built to your drawing.

Optical quartz glass

Optical grades and where UV and IR transmission matter.

Quartz glass products

Tubes, rods, plates, boats, crucibles, tanks, and inline heaters.

Custom quartz glass

Build-to-print quartz parts from a single prototype to production.